Related products

Model 21-80/30 G (Vanishing Edge & Water Feature Pump)
The Speck Model 21-80/30G is a high efficiency plastic Special Water Feature Pump. The Model 21-80/30G is ideally suited for pools with a vanishing edge, waterfall, fountain, or water slide application. The flooded suction pump design provides maximum flow at low head and is extremely quiet due to a large 4″ suction and discharge and low RPM motor (1750 RPM). Features This high volume, low head pump comes complete with our unique mechanical shaft seal that allows the pump, if mistreated, to run dry for up to one hour. The pump can be used for pool water with a salt concentration of up to 5000 ppm. (For a high concentration please call 1-800-223-8538) Non-corrosive, chemical/UV resistant, and can withstand temperatures of up to 175° F. For pool users’ safety, the impeller has a dielectric shaft sleeve that provides absolute separation between the pool water and electric parts. Suctio
Read More » Request A Quote »
The Speck Model 21-80/30G is a high efficiency plastic Special Water Feature Pump. The Model 21-80/30G is ideally suited for pools with a vanishing edge, waterfall, fountain, or water slide application. The flooded suction pump design provides maximum flow at low head and is extremely quiet due to a large 4″ suction and discharge and low RPM motor (1750 RPM). Features
• This high volume, low head pump comes complete with our unique mechanical shaft seal that allows the pump, if mistreated, to run dry for up to one hour.
• The pump can be used for pool water with a salt concentration of up to 5000 ppm. (For a high concentration please call 1-800-223-8538)
• Non-corrosive, chemical/UV resistant, and can withstand temperatures of up to 175° F.
• For pool users’ safety, the impeller has a dielectric shaft sleeve that provides absolute separation between the pool water and electric parts.
• Suction and discharge are equipped with 4″ quick disconnect unions for easy installation and maintenance.
• Heavy duty “1081” E-plus® /extreme-E™ energy efficient pool motor with large 56 frame is thermally protected, has a PSC switchless design and extra large sealed ball bearings.
• Motor is easy to remove without disturbing the plumbing. Reusable o-rings throughout.
• Every pump is performance tested before leaving the Speck factory.
Read Less » Request A Quote »






Your Name



Your Phone



Your email



Your subject



Your message




Model 21-80 BS (Special Application Pump)
The SPECK Model 21-80 BS is a high efficiency plastic pool pump. The Model 21-80 BS is ideally suited for commercial vacuum and sand filters, hydrotherapy, swim spas, waterfalls, water slides, and vanishing edge pool applications. This pump design provides maximum flow at low head and has 250 cubic inch all plastic strainer tank, and is self-priming up to 4 feet. Features This high volume, low head pump comes complete with our unique mechanical shaft seal that allows the pump, if mistreated, to run dry for up to one hour. The pump can be used for pool water with a salt concentration of up to 5000 ppm. (For a high concentration please call 800-223-8538) Non-corrosive, chemical/UV resistant, and can withstand temperatures of up to 175° F. For pool users’ safety, the impeller has a dielectric shaft sleeve that provides absolute separation between the pool water and electric parts.
Read More » Request A Quote »
The SPECK Model 21-80 BS is a high efficiency plastic pool pump. The Model 21-80 BS is ideally suited for commercial vacuum and sand filters, hydrotherapy, swim spas, waterfalls, water slides, and vanishing edge pool applications. This pump design provides maximum flow at low head and has 250 cubic inch all plastic strainer tank, and is self-priming up to 4 feet. Features
• This high volume, low head pump comes complete with our unique mechanical shaft seal that allows the pump, if mistreated, to run dry for up to one hour. The pump can be used for pool water with a salt concentration of up to 5000 ppm. (For a high concentration please call 800-223-8538)
• Non-corrosive, chemical/UV resistant, and can withstand temperatures of up to 175^° F.
• For pool users’ safety, the impeller has a dielectric shaft sleeve that provides absolute separation between the pool water and electric parts.
• All models are equipped with 4″ female slip adaptor on suction of strainer tank and 4″ male slip adaptors on the discharge.
• Heavy duty “1081” E-plus® /extreme-E™ energy efficient pool motors for extra low energy consumption. This large 56 frame motor is thermally protected, has a PSC switchless design and extra large sealed ball bearings. (No motor starter required)
• Motor is easy to remove without disturbing the plumbing. Reusable o-rings throughout.
• Every pump is performance tested before leaving the Speck factory.
Read Less » Request A Quote »






Your Name



Your Phone



Your email



Your subject



Your message




Model 21-80 GS (BADU SwimJet & Special Application Pump, Self-Priming)
The Speck Model 21-80 GS is a high efficiency self-priming plastic pool pump. The Model 21-80 GS is ideally suited for commercial vacuum and sand filters, hydrotherapy, swim spas, waterfalls, water slides, and vanishing edge pool applications. Features This high performance pump comes complete with our unique mechanical shaft seal that allows the pump, if mistreated, to run dry for up to one hour. The pump can be used for pool water with a salt concentration of up to 5000 ppm. (For a high concentration please call 1-800-223-8538) Non-corrosive, chemical/UV resistant, and can withstand temperatures of up to 175° F. For pool users’ safety, the impeller has a dielectric shaft sleeve that provides absolute separation between the pool water and electric parts. All models are equipped with 4″ quick disconnect unions. Heavy duty “1081” E-plus® /extreme-E™ energy
Read More » Request A Quote »
The Speck Model 21-80 GS is a high efficiency self-priming plastic pool pump. The Model 21-80 GS is ideally suited for commercial vacuum and sand filters, hydrotherapy, swim spas, waterfalls, water slides, and vanishing edge pool applications. Features
• This high performance pump comes complete with our unique mechanical shaft seal that allows the pump, if mistreated, to run dry for up to one hour.
• The pump can be used for pool water with a salt concentration of up to 5000 ppm. (For a high concentration please call 1-800-223-8538)
• Non-corrosive, chemical/UV resistant, and can withstand temperatures of up to 175° F.
• For pool users’ safety, the impeller has a dielectric shaft sleeve that provides absolute separation between the pool water and electric parts.
• All models are equipped with 4″ quick disconnect unions.
• Heavy duty “1081” E-plus® /extreme-E™ energy efficient pool motor with large 56 frame is thermally protected (no motor starter required). PSC switchless design and extra large sealed ball bearings.
• Motor is easy to remove without disturbing the plumbing. Reusable o-rings throughout.
• Every pump is performance tested before leaving the Speck factory.
Read Less » Request A Quote »






Your Name



Your Phone



Your email



Your subject



Your message




Model 21-80 G (BADU SwimJet & Special Application Pump, Flooded Suction)
The Speck Model 21-80 G is a high efficiency plastic pool pump. The Model 21-80 is ideally suited for commercial vacuum and sand filters, hydrotherapy, swim spas, waterfalls, water slides, and vanishing edge pool applications. This pump design provides maximum flow at low head and is available in two version: flooded suction or self-priming. Features This high performance pump comes complete with our unique mechanical shaft seal that allows the pump, if mistreated, to run dry for up to one hour. The pump can be used for pool water with a salt concentration of up to 5000 ppm. (For a high concentration please call 1-800-223-8538) Non-corrosive, chemical/UV resistant, and can withstand temperatures of up to 175° F. For pool users’ safety, the impeller has a dielectric shaft sleeve that provides absolute separation between the pool water and electric parts. All models are equipped
Read More » Request A Quote »
The Speck Model 21-80 G is a high efficiency plastic pool pump. The Model 21-80 is ideally suited for commercial vacuum and sand filters, hydrotherapy, swim spas, waterfalls, water slides, and vanishing edge pool applications. This pump design provides maximum flow at low head and is available in two version: flooded suction or self-priming. Features
• This high performance pump comes complete with our unique mechanical shaft seal that allows the pump, if mistreated, to run dry for up to one hour.
• The pump can be used for pool water with a salt concentration of up to 5000 ppm. (For a high concentration please call 1-800-223-8538)
• Non-corrosive, chemical/UV resistant, and can withstand temperatures of up to 175° F.
• For pool users’ safety, the impeller has a dielectric shaft sleeve that provides absolute separation between the pool water and electric parts.
• All models are equipped with 4″ quick disconnect unions.
• Heavy duty “1081” E-plus® /extreme-E™ energy efficient pool motors for extra low energy consumption. This large 56 frame motor is thermally protected, has a PSC switchless design and extra large sealed ball bearings. (No motor starter required)
• Motor is easy to remove without disturbing the plumbing. Reusable o-rings throughout.
• Every pump is performance tested before leaving the Speck factory.
Read Less » Request A Quote »






Your Name



Your Phone



Your email



Your subject



Your message